Accusplit 1640M4 Dépliant

AUTO MOVEMENT SENSOR
1. To filter out random movements, the unit remains in 

  standby mode until 5 continuous steps are registered.  

  Only then are the 5 steps calculated in, and an Active 

  indicator “▲” appears on the upper left of display.
2. When regular walk/run movement stops, after 2 seconds  

  the timer pauses and the unit switches to standby status  

  (Active indicator “▲” disappears). 

RESETTING YOUR PEDOMETER 
Most people prefer to reset step counts daily. To reset: While 

displaying Day’s STEPs, DISTANCE, or ACTIVITY TIME, press 

and hold yellow RESET button for at least two seconds to 

reset all of these to zero. When displaying Total STEPs, press 

yellow RESET button for two seconds to reset all counts, 

including Total STEPS, to zero.

REGISTER NOW 

Please return  

your AE1640M4 Registration to  
the Repair Center address in the  
warranty, and we will let you know 
about future products. 

Email (preferred)
User

See label inside the lid of your pedometer

REPLACING THE BATTERY
When the display starts to dim or goes blank, it is time to replace 

the battery. Your pedometer uses one Type LR43 (L1142) 1.5 volt 

alkaline battery. To replace:

1. Insert a coin into the slot on the bottom of the case, and twist  

  counterclockwise to loosen the case front. Lift case front away.
2. Using a pen or other thin object, push battery sideways out  

  of its holder. Replace it with a new battery. The battery’s  

  positive (+) terminal should be FACE UP while you put it into  

  the pedometer.
3. Align case front over the pedometer and press gently to snap  

  cover back into place, starting with top.