Stamina Products 20-2021 Manuale Utente
1. To store the
Ab/Hyper Pro, simply keep it in a clean dry place.
2. The
Ab/Hyper Pro must be lifted for movement. Two people may be required.
3. Follow the following process to fold the
Ab/Hyper Pro as illustrated for easy storage.
The safety and integrity designed into the
Ab/Hyper Pro can only be maintained when the Ab/Hyper
Pro is regularly examined for damage and wear. Special attention should be given to the following:
1. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
2. Verify that the
CAUTION LABEL(28) is in place and easy to read. Call Stamina Products immediately
at
1-800-375-7520 for a replacement CAUTION LABEL(28) if it is missing or damaged.
3. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
4. Worn or damaged components shall be replaced immediately or the
Ab/Hyper Pro removed from
service until repair is made.
5. Only Stamina Products supplied components shall be used to maintain/repair the
Ab/Hyper Pro.
6. Keep your
Ab/Hyper Pro clean by wiping it off with an absorbent cloth after use.
STORAGE
MAINTENANCE
11
a. Remove the
LOCKING PIN(14) to adjust the KNEE
CUSHIONS(3) to lowest position. Then lock in position
with the pin.
b. Remove the
LOCKING PIN(14) from the SEAT
ADJUSTMENT(9) to fold down the SEAT CUSHION(1).
Store the pin in the hole on the
CUSHION SUPPORT
FRAME(4).
c. Remove the
LOCKING PIN(14) from the SUPPORT
POST(5) to fold the CUSHION SUPPORT FRAME(4).
Store the pin in the same hole in the
SUPPORT
POST(5).