Impex MD-844 Manuale Utente

 

A.)  Attach two Ø ¾” Leg Developer Bushings (#27) to the Leg Developer (#11).  Attach the 

Leg Developer to the Front Post (#10). Secure it with one M10 x 3 1/8” Allen Bolt (#46), 
two Ø ¾” Washers (#53), and one M10 Aircraft Nut (#57

and Bolt. Make sure the Leg Developer is able to swivel. 

B.)  Insert three Foam Tubes (#13) halfway through the holes on the Leg Developer and Front 

Post. Push six Foam Rolls (#33) onto the Tubes from both ends. Plug six Foam Roll End 
Caps (#32) into the ends. 

C.)  Slide an Olympic Sleeve (#35) onto the weight post on Leg Developer. Attach a Spring 

Clip (#36) onto the Sleeve.