Dimension One Spas 2003 Manuale Utente

2003 Owner’s Manual 

 

 

JETS 2 and JETS 3 Buttons: Press the appropriate button once to turn on Pumps 2 
or 3. The pumps work independently, thus allowing you to control the total volume of 
water pumped to the Swim Jets. Pressing either button a second press will turn that 
pump(s) off.  
 
A built-in timer will shut the pump(s) off after 20 minutes of operation unless you 
manually shut them off earlier. The Jets 2 or Jets 3 Indicator light will be lit next to the 
Jets 2 or Jets 3 Button whenever that Jet is running. 
 
Pumps 2 and 3 provide high volume water flow to the Swim Jets. 
 

 

 

 

If you are operating with a 60-amp service for heat and pumps, the heater will turn off if any 
of the pumps are operated at high speed. If you are running a separate 50-amp service for 
heat and a separate 50-amp service for the pumps, you can continue to heat your water while 
operating the pumps at high speed.

 

 

Light Button: Press this button to turn on the Aquatic Fitness System light; a 
second press will turn the light off. The Light Indicator next to the Light Button will be 
lit while the light is on. The light, when the Light button is manually pressed, has an 
automatic one-hour time out. Some Aquatic Fitness System models have two 
lights controlled by this switch. 
 

 

LED Display Window:  This window displays the actual water temperature.  
However when you are setting the “target temperature” for your water, this window 
will display the SET temperature. After a brief pause, about 5 seconds, the window 
will return the display to the actual water temperature. 
 

 

12