Pioneer djm-350 Manuale Utente

Pagina di 48
DRB1504-E
En
11
English
11
10
Monitoring the sound over 
headphones (headphones section)
HEADPHONES
CUE
CH-1
CUE
MIXING
CUE
MASTER
CH-2
LEVEL
PHONES
0
8
9
a
7
1  Connect headphones to the [PHONES] jack.
For instructions on connections, see Connecting the input/ output 
terminals
 on page 7.
2  Press [CH-1 CUE] or [CH-2 CUE] 7.
Select the channel you want to monitor.
—  [CH-1 CUE]: The sound of [CH-1] is monitored.
—  [CH-2 CUE]: The sound of [CH-2] is monitored.
!  This operation is not necessary to monitor the master channel 
sound (the sound output from the [MASTER OUT 12] terminals).
3  Turn [MIXING] 8.
—  When turned counterclockwise: The volume of [CH-1] and 
[CH-2] becomes relatively louder.
—  At the center position: The sound of [CH-1] and [CH-2] has 
the same volume as the sound from the [MASTER OUT 12
terminals.
—  When turned clockwise: The volume of the sound output from 
the [MASTER OUT 12] terminals becomes relatively louder.
4  Turn [LEVEL] 9 in the headphones section clockwise.
Sound is output from the headphones.
!  Monitoring is canceled when [CH-1 CUE] or [CH-2 CUE] is pressed 
again.
!  Monitoring of the sound output from the [MASTER OUT 12] termi-
nals cannot be canceled.
Using the effect function (master 
effect section)
This unit is equipped with four effect buttons. When an effect button 
is pressed, the corresponding effect is applied to the audio signals 
output from the [MASTER OUT 12] terminals.
2 CHANNEL  DJ  MIXER
LEVEL/DEPTH
FILTER
CRUSH
GATE
JET
MASTER EFFECT
q
r
Applying an effect
Press one of the [MASTER EFFECT (GATE, CRUSH, JET, 
FILTER)] 
q buttons.
The effect is applied to the sound.
The button that was pressed flashes.
The effect differs for the different buttons. For details on the different 
effects, see the table below.
!  When a button that is flashing is pressed again, the effect is turned 
off.
Effect Name
Descriptions
LEVEL/ DEPTH
GATE
The distinctive range is 
cut from the sound of the 
track’s rhythm section to 
give variation to the rhythm.
Left: The high range (high 
hat, etc.) is given variation.
Right: The low range (bass 
drum, etc.) is given varia-
tion.
CRUSH
The sound is moderately 
crushed, adding accent.
Left: The sound is crushed 
and an effect as if the high 
range was gradually cut is 
achieved.
Right: The sound is crushed 
and an effect as if the low 
range was gradually cut is 
achieved.
JET
An effect like a jet ascend-
ing and descending is 
achieved.
Left: An effect like a jet 
descending is achieved.
Right: An effect like a jet 
ascending is achieved.
FILTER
The sound of the high or 
low range is filtered out, 
greatly changing the tone.
Left: An effect as if the high 
range was gradually cut is 
achieved.
Right: An effect as if the low 
range was gradually cut is 
achieved.
Varying the effect
Turn [LEVEL/ DEPTH] r.
The effect changes according to the direction in which the [LEVEL
DEPTH] is turned and its position.
!  The original sound is output when [LEVELDEPTH] is set to the 
center position.
Using a microphone or external 
device (MIC/ AUX section)
MIC /AUX
MIC
0
LEVEL
HI
AUX
LOW
MIC/AUX
ON
12
12
12
12
3
4
6
5
1  Switch [MIC, AUX] 3.
—  [MIC]: The microphone connected to the [MIC] terminal is 
selected.
—  [AUX]: The external device connected to the [AUX] terminals 
is selected.
2  Press [MIC/AUX ON] 6.