Emerson Process Management NGA2000 HFID Manuale Utente
Instruction Manual
748297-E
June 2003
Rosemount Analytical Inc. A Division of Emerson Process Management
Maintenance and Troubleshooting 4-3
Model NGA2000 HFID
Oven Assembly
659551
659551
4-2 COMPONENT
REPLACEMENT
a. Oven
Though the oven can be replaced as a
complete unit, all internal components are
field replaceable.
complete unit, all internal components are
field replaceable.
Oven Removal
Refer to Figure 4-3 below, disconnect the
oven's three gas lines and seven electri-
oven's three gas lines and seven electri-
cal cables, noting location of mating con-
nectors for re-installation.
nectors for re-installation.
Note
DO NOT remove the fittings from the
gas lines on the detector.
gas lines on the detector.
Remove the two hex nuts securing the
oven to the chassis and the two screws
securing oven to the rear panel. Lift oven
assembly from analyzer.
oven to the chassis and the two screws
securing oven to the rear panel. Lift oven
assembly from analyzer.
Figure 4-3.
Removal of Oven from Chassis