Pioneer V5000 Manuale Utente

DVD-V5000 DVD Player

RS-232 Command Protocol

 

scanning is finished, the player resumes the Random Access mode and 
returns the completed status message. 

 

If the SCAN command is sent while the player is in Fast Forward or Reverse 

Playback, the player enters Scan mode. 

 

Once the NS command is sent, the player resets to the normal Playback 
mode and returns the completed status message. 

 
Execution : 

String 

Status Return 

DVD player 

NF<CR> or NR<CR> 

R<CR> 

Play mode to Scan mode 

NS<CR> 

R<CR> 

Return to Play mode 

 

Function 

:  Playback occurs at the speed specified in the Speed Register 

 

  (Option - Auto Stop) 

Format : 

(Address)MF 

(Multi-Speed 

Forward) 

 

  (Address)MR  (Multi-Speed Reverse) 

(Address > 0) 

Explanation :  If the player is in Random Access mode when the command is 

executed, the player enters Multi-Speed mode and returns the completed 
status message immediately. 

 

 

While in Multi-Speed mode, pictures are reproduced at the speed specified 
by the Speed Register.  No audio tracks are played during Multi-Speed 
playback. 

 

NOTE: These speeds are approximate values only. 

 

 

If an address is specified, an Auto Stop occurs on the selected sequence.  
The specified address is written as a Mark Frame or Mark Time and is 
compared with the current address.  If the current address matches the 
specified address, the player enters Pause or Still mode and returns the 
completed status message.  This command functions in a similar manner as 
the Stop Marker command. 

 

 

If another command is issued before the player reaches the specified 
Address, the Auto Stop command is canceled and the player enters normal 
Multi-Speed mode.  However, if the disc program does not allow a pause, the 
player ignores the command. 

 

 

- 19