Tunturi C3 Manuale Utente

Remove the rubber band from around meter 

cable coming from the frame tube and the four 

attachment screws with washers. Attach the meter 

cable to the connector coming from the front 

frame tube. Set the adjustment knob so that 

number 8 is shown in the display and attach the 

end of the brake wire coming from the front frame 

tube to the wire coming from the frame tube. 

Push the front frame tube inside the frame tube: 

do not damage the meter cable! Attach the front 

frame tube tight to the frame with the washers and 

attachment screws.

Push the metal shaft through the bracket housing 

of the left arm. Attach now the left arm to the front 

frame tube by pushing the metal shaft through the 

opening in the tube. Push the right arm on the 

shaft and lock it by tightening a large washer, a 

locking sleeve and a screw to the both ends of 

the shaft. Tighten the arms using two Allen keys. 

Push the left footrest support forward so that you 

can push the adjustment tube in the front of the 

foot rest support inside the arm tube. Select the 

appropriate adjustment (see Adjusting the footrest 

supports) and lock the adjustment tube with the 

locking screw. Repeat the procedure with the right 

footrest support.

C3_ohje

22.3.2002, 12:41

2-3