Sanus Systems VMXA1 Dépliant

Thank you for choosing a Sanus Systems VisionMount™ Model: VMXA1. The VMXA1 is 8″ [203 mm] longer and replaces the Center 

Plate provided with the VMPL3. The VMXA1 is designed to hold up to 280 lbs [127 kg]. 

Sanus Systems  2221 Hwy 36 West, Saint Paul, MN 55113  08.02.06 (100042)

Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com

Using the VMXA1, the Wall Plate Assembly (

A) can be adjusted in width from 35″ to 50″ [889 mm to 1270 mm]. Determine how wide you 

want the Wall Plate Assembly based on the following criteria:

• Width of television (Wall Plate Assembly should be configured so the total width is less than the overall width of your television)

• Width of Hole Pattern on television (Wall Plate Assembly should be wider than the horizontal distance between threaded inserts on the 

   back of your TV by at least 2″ [50.8 mm])

• Stud Spacing (Sanus recommends attaching Wall Plate Assembly to three studs for televisions over 125 lbs. [56.7 Kg])

Remove each Flange Nut and Nylon Washer from the Wall Plate Assembly (

A) as shown in Diagram 1A.

Remove the Center Plate of the Wall Plate Assembly (

A) as shown in Diagram 1B.