Teledyne LXT-220 Manuale Utente

19

 

Installation of the LXT-220 Controller involves: 

•  Unpacking the instrument 

•  Mounting 

•  Making Electrical Connections 

•  Configuring the Instrument 

•  Calibration 

The LXT-220 Controller has been carefully packaged to protect it 

from damage during shipment and dry storage.  Upon receipt please 
follow the procedure outlined below: 

1.  Before unpacking, inspect the condition of the shipping container 

to verify proper handling by the carrier. If damage is noted, save 
the shipping container as proof of mishandling for the carrier. 

2.  Check the contents of the shipping container with the items and 

quantities shown on the packing list.  Immediately report any 
discrepancies to TI/TAI. 

3.  Save the original packing material until you are satisfied with the 

contents.  In the event the transmitter must be returned to the 
factory, the packing material will allow you to properly ship it to 
TI/TAI. 

4.  Familiarize yourself with the instrument before installation, and 

follow proper installation and wiring procedures. 

Three typical installation configurations are available for the LXT-

220:  

•  Universal mounting plate