Akai MPD26 Manuale Utente
10
NOTE FIELD
PLAY MODE FIELD
PLAY MODE FIELD
PRESSURE FIELD
NOTE PARAMETERS
MIDI CHANNEL FIELD
This field sets the MIDI Port and Channel which the pad will use to
transmit
transmit
1.
Press [<] to messages. You can assign pads to one of two MIDI Ports,
A or B, and to one of 16 MIDI Channels on each port (i.e. B11). You
may also assign the pad to the MIDI Common Channel.select MIDI
Port/Channel field.
may also assign the pad to the MIDI Common Channel.select MIDI
Port/Channel field.
2.
While in MIDI Port/Channel field, use [VALUE] dial to select desired
MIDI Port and Channel.
3.
Press [>] to select the next field.
Note: When not used via USB, only pads assigned to port A will transmit
MIDI information via the 5-pin MIDI port on the back of the MPD26.
MIDI information via the 5-pin MIDI port on the back of the MPD26.
NOTE FIELD
This field sets the MIDI Note Number that the pad will transmit when it is
hit.
hit.
1.
Use [<] or [>] to select Note field.
2.
While in MIDI Port/Channel field, use [VALUE] dial to select desired
MIDI Port and Channel.
3.
Press [>] to select the next field.
Note: Software modules or drum machines are often programmed to
trigger sounds based on specific Note Numbers associated with each
sample. You may have to experiment setting different Note Numbers on
the MPD26 to find the range that is suited for your application.
trigger sounds based on specific Note Numbers associated with each
sample. You may have to experiment setting different Note Numbers on
the MPD26 to find the range that is suited for your application.
PLAY MODE FIELD
Here, you can select whether the pad transmits Note On/Off information in
a standard momentary (MTY) way like a keyboard, where hitting the pad
generates a Note On and releasing it a Note Off message, or in a toggle
(TGL) way where the first hit of the pad outputs a Note On, the second hit
transmits a Note Off.
a standard momentary (MTY) way like a keyboard, where hitting the pad
generates a Note On and releasing it a Note Off message, or in a toggle
(TGL) way where the first hit of the pad outputs a Note On, the second hit
transmits a Note Off.
1.
Use [<] or [>]to select Play Mode field.
2.
While in Play Mode field, use [VALUE] dial to select desired Play Mode.
3.
Press [>]to select the next field.
PRESSURE FIELD
Here, you can set the pad to transmit pressure information as a channel
pressure message (CPR) or polyphonic pressure message (PPR).
pressure message (CPR) or polyphonic pressure message (PPR).
1.
Press [>] to select Pressure field.
2.
While in Pressure field, use [VALUE] dial to select “OFF”, “CPR”, or
“PPR”.
When finished editing, press [ENTER] to save or [<] to cancel the changes.
MIDI PORT/CHANNEL FIELD