Akai MPD26 Manuale Utente

 

 

 
The Time Division feature works in conjunction with Note Repeat.  When Note Repeat is enabled and a pad 
is held down, the MPD26 will output notes at a rate equivalent to the Time Division setting.  To change to a 
new Time Division setting, press and hold [TIME DIVISION] and select a new rate by pressing one of Pads 8-
16 (1/4, 1/4T, 1/8, etc.).  To select the amount of Swing, press and hold [TIME DIVISION] and press one of 
Pads 9-16 (54%, 56%, etc.).  The adjustments you make to either parameter will be shown in the LCD. 

Please refer to the following illustrations to better understand how the Time Division feature works with Note 
Repeat: 

 

 

With an 1/8 note Time Division setting, the sequence will 
look like this. 

 

With an 1/8T note Time Division setting, the sequence will 
look like this. 

 

With a 1/16 note Time Division setting, the sequence will 
look like this. 

 

With a 1/16T note Time Division setting, the sequence will 
look like this. 

 

With a 1/32 note Time Division setting, the sequence will 
look like this. 

 

With a 1/32T note Time Division setting, the sequence will 
look like this. 

 

 

 

1.

 

To edit Time Division settings, press the [EDIT] button to enter Edit 
Mode. 

2.

 

Now select Time Division for editing by pressing [TIME DIVISION]. 

3.

 

You will see Page 1 displayed on the screen (shown on the left). 

4.

 

Press [ENTER] to edit the Time Division settings. 

 

 

 

 

Each Preset can have a default Time Division setting which is set every 
time the Preset is loaded. 

1.

 

While in Default Time Division field, use [VALUE] dial to select the 
default Time Division (1/4, 1/4T, 1/8, etc.) 

2.

 

Press [>] to select the next field. 

PRESS ENTER TO EDIT 

DEFAULT DIVISION FIELD