Invacare XPO100B Manuale Utente

SECTION 7—CLEANING, CARE, AND MAINTENANCE

Invacare XPO

™

Air Intake Filter

CAUTION

DO NOT operate the XPO

without the air intake filter

installed.

NOTE: For this procedure, refer to FIGURE 7.1.

NOTE: Remove the air intake filter and clean it at least once each
week.

1. Lift filter cover slightly and pull down to remove tabs from

the grooves.

2. Lift out the filter.

3. Use a vacuum cleaner or wash with a mild liquid dish

detergent (such as Dawn™) and water. Rinse thoroughly.

4. Thoroughly dry the filter and inspect for fraying,

crumbling, tears and holes. Replace filter if any is found.

5. Reinstall the filter cover by placing the tabs in the slots and

engaging the magnet.

NOTE: Use only Invacare part number 1148281 as the air intake
filter for your XPO

FIGURE 7.1 Air Intake Filter

Cover

Filter

Magnet

Cover

Tabs

Magnet

Grooves