Philips 861304 Manuale Utente
42
Ph
ilip
ilip
s M
e
e
di
ca
l Sy
st
st
e
m
s
HEARTSTART FRx 861304 OWNER’S MANUAL
AP
P
E
ND
IC
ES
Patient treatment protocol options
parameter
settings
default
default description
“call EMS” voice
reminder timing
• At power on (when the
user turns on the FRx)
• At power on and at the
start of the first patient
care pause
care pause
• At the start of the first
patient care pause
• No reminder
At the start of
the first
patient care
pause.
the first
patient care
pause.
Provides a voice reminder to
make sure emergency medical
services have been called, at
the start of the first patient
care pause.
make sure emergency medical
services have been called, at
the start of the first patient
care pause.
shock series
1, 2, 3, 4
1
The automatic protocol pause
for CPR is activated each time
a shock is delivered.*
for CPR is activated each time
a shock is delivered.*
During the protocol pause,
the FRx does not perform
rhythm analysis.
the FRx does not perform
rhythm analysis.
The length of the protocol
pause after a shock series is
completed is determined by
the protocol pause timer
setting.
pause after a shock series is
completed is determined by
the protocol pause timer
setting.
shock series interval
(minutes)
1.0, 2.0,
∞
(infinity)
1.0
A delivered shock must occur
within 1 minute of the
previous shock to be counted
as part of the current shock
series.
within 1 minute of the
previous shock to be counted
as part of the current shock
series.
NOTE: This parameter is only
applicable when the shock series
is not configured to the default 1
shock.
applicable when the shock series
is not configured to the default 1
shock.
* A shock series begins when a shock is delivered after the FRx is turned on. A new shock series begins after a protocol
pause. If shock series is configured for 2 or more, a new shock series also begins if the time since the previous shock
exceeds the shock series interval setting.
exceeds the shock series interval setting.