Universal Electronics Polaris Manuale Utente

Welcome to the Polaris Remote Control Quick 
Start Guide. To start using your remote control 
right away, just follow the steps below.
Note:  This Quick Start Guide assumes your 
Polaris Remote Control has battery power. If 
your remote control does not have power, 
please refer to the section, See “Installing 
Batteries” on page 11. 
Your Polaris Remote Control was designed for 
comfort, convenience, and simplicity. Use the 
TV and CBL keys to turn the power on and off 
for your television and cable box. The Volume 
and Mute keys are locked to control your TV’s 
volume, and all other functions control your 
cable box.

You can control your television and your cable 
box with your Polaris Remote Control. Follow 
these steps to program device control.
Note: 

Please refer to “Device Table” on 
page 11 to find out which devices you 
can program onto each device key. 

1.

Turn on the device you wish to 
control.

3.

Use the “Manufacturer’s Codes 
(Códigos del Fabricante)” on page 39 
to locate the type of device and its 
brand name. Enter the first four-digit 
code for that device and brand. If the 
code is correct, the device key blinks 
twice. If the key emits a single, long 

2.

Press the appropriate device key 
(either TV or CBL). The key blinks 
once. Then press and hold the SETUP 
key until the selected device key 
blinks twice.