Sony RMN-U1 Manuale Utente

The clock can be set either automatically by 
connecting the unit to the Internet, or manually.

You can set the clock by connecting the unit to the 
NTP (Network Time Protocol) server on the 
Internet. Before using this function, make sure the 
network settings have already been made properly.

Press HOME on the unit.

The HOME screen appears.

Tap “

Settings.”

Tap “Common Settings.”

Tap “Clock Settings.”

Tap “Date&Time Settings.”

Tap “NTP Settings,” then tap 
“Next

b.”

If you want to set the clock manually, see “To 
set the clock manually” (page 31).

Tap the text box that is below 
“NTP Server Name:.”

Enter the name or IP address of 
the NTP Server.

For details on entering text during the setup, 
see “Entering text” (page 19).

The unit connects to the default server when you tap 
“OK” without changing the server name.

Tap the text box that is below 
“Time Zone:.”

Tap the desired time zone.

If the desired city does not appear in the “Time 
Zone:,” select a city that is within the same time 
zone as the desired city.

Tap “OK.”

Refer to “To set the clock manually” 
(page 31), if you failed the clock settings.

The following items appear in step 10. Select the 
city where the unit is being used.

GMT+13 Nukualofa
GMT+12 Auckland
GMT+11 Noumea
GMT+10 Sydney, Port Moresby