Samsung SIR-TS160 Manuale Utente
Connecting your DIRECTV
®
High-Definition Receiver
1
Make sure your TV, A/V receiver, and DIRECTV HD Receiver are turned off
and unplugged.
2
If you plan to use the DIRECTV HD Receiver to watch DIRECTV
®
programming,
connect the RG-6 coaxial cable running from your satellite dish to the
SATELLITE IN jack on the back of your DIRECTV HD Receiver.
SATELLITE IN jack on the back of your DIRECTV HD Receiver.
3
If you plan to watch cable TV programming, connect the coaxial cable running
from your cable TV system to the CABLE IN jack on the back of the DIRECTV
HD Receiver.
from your cable TV system to the CABLE IN jack on the back of the DIRECTV
HD Receiver.
4
If you plan to watch off-air TV programming (analog or digital), connect the
coaxial cable running from your off-air TV antenna to the AIR IN jack on the
back of the DIRECTV HD Receiver.
coaxial cable running from your off-air TV antenna to the AIR IN jack on the
back of the DIRECTV HD Receiver.
5
Connect the supplied phone cord to a telephone wall jack and to the TEL LINE
jack on the back of the DIRECTV HD Receiver.
jack on the back of the DIRECTV HD Receiver.
Note: A triple LNB multi-satellite dish antenna including a Sat C LNB is required to
receive High-Definition programming from DIRECTV.
CABLE IN
AIR IN
SATELLITE IN
TEL LINE
DVI/ HDCP OUT
6
Make video connections to your TV.
Your DIRECTV HD Receiver supports the following kinds of video connections:
•
DVI
•
RGB
•
component (Y, Pb, Pr)
•
S-Video
•
composite (standard A/V jacks)
•
RF
Chapter 3: Setting up and connecting
22