Motorola DCT1800 Manuale Utente

B-4 

A sequence of LED flashes communicates errors when they occur. The Error Code 
field displays the code for the active error when appropriate. 

The state of the set-top is connected or disconnected. The connected state of the 
set-top is set by a DCT-operations connect or disconnect message. The OSD 
displays DISCONNECTED when the set-top is in the disconnected state and 
CONNECTED when it is in the connected state. 

Platform ID 

A 16-bit hexadecimal number used to differentiate between digital platform images in 
the field. It is also called the ROM ID. 

A hexadecimal number that indicates the set-top manufacturer and product family.  

A hexadecimal number that indicates the set-top model. 

The Remod Channel number can be 3 or 4 (NA systems). The output port 
configuration displays the configuration of the set-top output or re-modulated (remod) 
port. The output port/remod port is the interface from the set-top to the subscriber TV. 

Indicates the time zone offset (in minutes) relative to GMT. 

Indicates the daylight savings entry time. 

Indicates the daylight savings exit time.  

Indicates the current time. 

 

A sequence of LED flashes communicates errors when errors occur. Table B-3 lists the error 
codes, associated flash sequences, causes, and remedies: 

None; no error condition exists 

Indicates normal condition after 
initialization 

Not applicable 

MSG

 LED flashes on and off 

The set-top did not receive a 
connect message 

Restore out-of-band signal 
Send a connect message 

Repeating series of two 

MSG

 

LED flashes, separated by a 
pause 

Init Error 

The set-top needs a power 
cycle to recover 

Repeating series of three 

MSG

 

LED flashes, separated by a 
pause 

DRAM error 

Not used at this time 

Repeating series of four 

MSG

 

LED flashes, separated by a 
pause 

DP-SRAM error 

Not used at this time