Sony DHG-M55CV Manuale Utente
Connecting the Digital Network Receiver
19
TV and VCR with A/V Connectors
See the illustration on the next page for details.
1
Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver’s
network signal) to the Digital Network Receiver’s
CABLE IN
jack.
2
Connect the Digital Network Receiver’s
LINE OUT 1 (TV) AUDIO /VIDEO
jacks to the TV’s
AUDIO/VIDEO IN
jacks.
3
Connect the Digital Network Receiver’s
LINE OUT 2 (VCR) AUDIO /VIDEO
jacks to the VCR’s
AUDIO/VIDEO IN
jacks.
4
Connect the VCR’s
AUDIO/VIDEO OUT
jacks
to the TV’s
AUDIO/VIDEO IN
jacks.
5
Connect one end of the AC power cord to the Digital Network
Receiver’s AC IN jack, then connect the plug end to an AC outlet.
Receiver’s AC IN jack, then connect the plug end to an AC outlet.
✍
If your TV has only one A/V input, the RF connection from VCR to TV is required for
watching through the VCR.
watching through the VCR.
✍
If your components have S VIDEO jacks: For best picture quality, use an S VIDEO
connection instead of the yellow video cable on your combined A/V cable. Using an S
VIDEO cable, connect the Digital Network Receiver’s S VIDEO OUT jack to the TV’s S
VIDEO IN jack. S VIDEO does not provide audio, so audio cables must still be connected
to provide sound.
connection instead of the yellow video cable on your combined A/V cable. Using an S
VIDEO cable, connect the Digital Network Receiver’s S VIDEO OUT jack to the TV’s S
VIDEO IN jack. S VIDEO does not provide audio, so audio cables must still be connected
to provide sound.
CV.book Page 19 Thursday, November 30, 2000 2:13 PM