Yamaha YW125Z Manuale Utente
5-35
1
2
3
4
5
6
7
8
9
EAU15943
OPERATION AND IMPORTANT RIDING POINTS
5-2
Starting off<IXE>
Acceleration and deceleration<IXE>
Braking<IXE>
EAU16793
Braking
EWA10300
WARNING
●
●
●
●
●
Avoid braking hard or suddenly
(especially when leaning over to
one side), otherwise the scooter
may skid or overturn.
(especially when leaning over to
one side), otherwise the scooter
may skid or overturn.
●
●
●
●
●
Railroad crossings, streetcar
rails, iron plates on road con-
struction sites, and manhole
covers become extremely slip-
pery when wet. Therefore, slow
down when approaching such
areas and cross them with cau-
tion.
rails, iron plates on road con-
struction sites, and manhole
covers become extremely slip-
pery when wet. Therefore, slow
down when approaching such
areas and cross them with cau-
tion.
●
●
●
●
●
Keep in mind that braking on a
wet road is much more difficult.
wet road is much more difficult.
●
●
●
●
●
Ride slowly down a hill, as brak-
ing downhill can be very diffi-
cult.
ing downhill can be very diffi-
cult.
1. Close the throttle completely.
2. Apply both front and rear brakes
2. Apply both front and rear brakes
simultaneously while gradually in-
creasing the pressure.
creasing the pressure.
EAU16761
Starting off
TIP
Before starting off, allow the engine to
warm up.
Before starting off, allow the engine to
warm up.
1. While pulling the rear brake lever
with your left hand and holding the
grab bar with your right hand, push
the scooter off the centerstand.
grab bar with your right hand, push
the scooter off the centerstand.
2. Sit astride the seat, and then ad-
just the rear view mirrors.
3. Switch the turn signals on.
4. Check for oncoming traffic, and
4. Check for oncoming traffic, and
then slowly turn the throttle grip (on
the right) in order to take off.
the right) in order to take off.
5. Switch the turn signals off.
EAU16780
Acceleration and decelera-
tion
tion
(a)
(b)
The speed can be adjusted by opening
and closing the throttle. To increase the
speed, turn the throttle grip in direction
(a). To reduce the speed, turn the throttle
grip in direction (b).
and closing the throttle. To increase the
speed, turn the throttle grip in direction
(a). To reduce the speed, turn the throttle
grip in direction (b).