Samsung DSR-1/1P Manuale Utente
Chapter 2 Fitting and Connecting Related Equipment
Chapter 2 Fitting and Connecting Related Equipment
29
Connecting Audio System
The DSR-1/1P is able to record sound not only from the microphone
attached to the camera but also from a wireless microphone or an external
audio system.
attached to the camera but also from a wireless microphone or an external
audio system.
Using a Wireless Microphone System
When using the wireless microphone system including a WRT-810A/830A
UHF Wireless Microphone and a WRR-810A/855A/860A UHF Portable
Tuner to record sound, connect the tuner as described below. (The
procedure below is for connecting the WRR-855A using the BTA-801
Portable Tuner Mount Adapter.)
UHF Wireless Microphone and a WRR-810A/855A/860A UHF Portable
Tuner to record sound, connect the tuner as described below. (The
procedure below is for connecting the WRR-855A using the BTA-801
Portable Tuner Mount Adapter.)
For details on using the wireless microphone system, see the operating
instructions for the microphone and tuner.
instructions for the microphone and tuner.
2
1
1
Attach the WRR tuner fitting
(not supplied) (Part No. A-
8278-057-A) to the rear of the
DSR-1/1P as shown in the
figure.
1 Pass a screwdriver through
(not supplied) (Part No. A-
8278-057-A) to the rear of the
DSR-1/1P as shown in the
figure.
1 Pass a screwdriver through
the holes and tighten the
screws.
screws.
2 Loosen the adjustment
screws.
3 Adjust the metal fitting
position for a battery pack
to be attached, and tighten
the adjustment screws to fix
its position.
to be attached, and tighten
the adjustment screws to fix
its position.
4 Attach the holder kit (two
fittings and four screws,
supplied with the tuner) to
the WRR tuner fitting (one
for the upper position and
the other for the lower
position).
supplied with the tuner) to
the WRR tuner fitting (one
for the upper position and
the other for the lower
position).
2
Mount the tuner on the WRR
tuner fitting, then tighten the
screw at the bottom of the
BTA-801.
tuner fitting, then tighten the
screw at the bottom of the
BTA-801.
For details about the WRR tuner
fitting (Part No. A-8278-057-A),
contact your Sony dealer.
fitting (Part No. A-8278-057-A),
contact your Sony dealer.
WRR-855A
(with BTA-801)
(with BTA-801)
Attachment plate
(Continued)
Press the knob and turn it 90˚
in a clockwise manner to
secure.
in a clockwise manner to
secure.