Graco Inc. 309967C Manuale Utente

See page 6 for recommended air accessories and 
installation.

To reduce the risk of static sparking, ground the pump 
and all other components used or located in the 
dispensing area. Check your local electrical code for 
detailed instructions for your area and type of 
equipment.

Pump: remove the ground screw (Z) and insert through 
the eye of the ring terminal at end of ground wire (Y). 
Fasten the ground screw back onto the pump and 
tighten securely. Connect the other end of the ground 
wire to a true earth ground. See F

IG

. 1. To order a 

Air and fluid hoses: use only grounded hoses.

Air compressor: follow manufacturer’s recommenda-
tions.

Dispense valve: ground through connection to a prop-
erly grounded fluid hose and pump.

Fluid supply container: follow local code.

To maintain grounding continuity when flushing or 
relieving pressure: hold metal part of the dispense 
valve firmly to the side of a grounded metal pail, then 
trigger the valve.

NOTE: Reference numbers and letters in parenthe-
ses in the text refer to the callouts in the figures and 
parts drawing.

NOTE: Always use genuine Graco parts and 
accessories, available from your Graco distributor.

Z

Y

ti1052