JVC HR-S9400U Manuale Utente

● The VCR's TimeScan indicator lights during TimeScan.

● The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.

● The TimeScan search speed is the same for SP and EP recordings.

● To resume normal playback, press PLAY.

● When using the VCR's TIME SCAN SHUTTLE ring, the playback speed may not change depending on how far it is turned.

● When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to 7x and -7x search speeds. Turning

the TIME SCAN SHUTTLE ring further will not increase the search speed.

● Picture may be distorted at the position where the recording speed is switched.

● The picture may be noisy for a moment when you change the playback speed.

● During high-speed search with a tape containing both SP and EP recordings, where the recording tape speed switches from EP

to SP, the search speed will change automatically to 7x normal playback speed with TimeScan.

● Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.

● Picture may appear distorted in comparison to normal playback.

● In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

● TimeScan sound quality will differ in comparison to normal playback.

● When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

Speed

Names of
special-effects
playback

Audio output

* Still mode cannot be engaged using the remote control's TIME SCAN button.

VCR's Time
Scan shuttle
indicator

TimeScan

Reverse

Forward

Play

Slow-Motion

*Still

Slow-Motion

Play

-7x -5x

-3x

-1x

-1/6x

-1/18x

1/18x 1/6x

2x 3x 5x 7x

SLOW

Green

Orange

Red

Orange

Green

Audio is output.

Audio is not output.

Audio is output.

Skip Search

SKIP OVER UNWANTED

SECTIONS

Press SKIP SEARCH 1 to 4 times during playback, with
"CA PLAYBACK" set to "OFF"

(

pg. 37). Each

press initiates a 30-second period of fast- motion
playback. Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search,
press PLAY.

SKIP SEARCH

If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF" (

pg. 40).