JVC HR-DD840KR Manuale Utente
22
EN
1
2
4
5
3
6
8
0
7
9
q
Simple
Recording
LOAD A CASSETTE
1
Make sure the record safety tab is intact. If not, cover the
hole with adhesive tape before inserting the cassette.
hole with adhesive tape before inserting the cassette.
SELECT RECORDING
CHANNEL
2
Press CH
5∞. Or press the appropriate NUMBER keys,
then press ENTER. (The channel changes after a few
seconds whether you press ENTER or not.)
seconds whether you press ENTER or not.)
● If you use the RF connection, by pressing the TV/VCR
button, select VCR mode to view the program to be
recorded.
recorded.
SET TAPE SPEED
3
Press SP/EP to set the recording speed.
START RECORDING
4
Press and hold REC and press PLAY on the remote
control, or press REC on the VCR's front panel.
control, or press REC on the VCR's front panel.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
● During record pause, you can change the recording
channel by using the CH
5∞ buttons or NUMBER keys.
STOP RECORDING
6
Press STOP or STOP/EJECT. Then press STOP/EJECT to
remove the cassette.
remove the cassette.
SIMPLE PLAYBACK AND RECORDING (cont.)
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
mode).
● To prevent accidental recording on a recorded cassette,
remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
To record on it later, cover the hole with adhesive tape.
Record safety tab
Accidental erasure prevention
REC
STOP
PLAY
SP/EP
CH
SP/EP
PAUSE
STOP/EJECT
PLAY
REC
NUMBER
CH
PAUSE
TV/VCR
ENTER