Go-Video DDV9355 Manuale Utente
8 - TIMER
RECORDING
59
10
Insert Tape
Insert a blank tape with a Record Safety Tab
into the deck you designated in Step 7.
into the deck you designated in Step 7.
Programming is Complete!
The event is stored in memory and will record
at the scheduled time. A red Timer icon will
appear on the front panel display to indicate
that an event is programmed.
at the scheduled time. A red Timer icon will
appear on the front panel display to indicate
that an event is programmed.
Notes:
• If there is a problem with your Timer Record-
• If there is a problem with your Timer Record-
ing, the Timer icon will flash on the front
panel display and a Timer Record Error will
appear on the TV screen; see page 60.
panel display and a Timer Record Error will
appear on the TV screen; see page 60.
• The event will record whether the VCR
power is on or off; i.e., if the VCR power is
off, it will turn on automatically when the
Timer Recording begins.
off, it will turn on automatically when the
Timer Recording begins.
• To stop an event in progress, press Stop on
the recording deck. A warning message will
appear on-screen. Press Stop again to cancel
the event.
appear on-screen. Press Stop again to cancel
the event.
Copy Tape
Deck
Deck
Power
Deck Select
Record
Rewind
Play
F. Forward
Pause
Stop
/
Eject
Be sure your videotape has a
Record Safety Tab. If it is
missing, you can cover the
opening with a small piece of
tape. Warning: Do not cover
this opening unless you are
sure you want to record over
the tape.
Record Safety Tab. If it is
missing, you can cover the
opening with a small piece of
tape. Warning: Do not cover
this opening unless you are
sure you want to record over
the tape.
Record Safety Tab
11
S P
S P
D E C K O N E
VCR
TIMER
The Timer indicator appears
when a Timer Recording Event
has been programmed