Go-Video 4-Head Hi-Fi Manuale Utente

 

   DISCOVER THE DUAL-DECK DIFFERENCE

The Dual-Deck VCR may miss an Index

mark if the mark is very close to the

current location, or it is at the beginning

of the tape, or if it is within 5 minutes

of another VISS mark.

You can also place Index marks during

a recording by pressing INDEX.

The Dual-Deck VCR has an Automatic Show Finder
feature. This feature combines the date/time stamp
plus the VHS Index Search System (VISS). VISS is the
VHS standard, so you can use the Dual-Deck VCR
index system with tapes made on other VCRs and
VHS camcorders that also use the VISS system.

The Dual-Deck VCR automatically records an Index
Mark on the tape each time you begin recording. You
will see IDX flash on the on-screen display.

You can locate these Index marks in two ways:

1. Use 

DECK SELECT

 to choose the active deck.

2. With a tape in the active deck, press 

INDEX

 on the

remote control. The INDEX menu will appear on
your screen.

3. Press 

FF

 to scan for Index marks forward, or

REW

 to scan for Index marks in reverse. The Index

Scan display will appear and the deck will fast
wind and play a few seconds of tape at each index
mark it encounters; it will then continue to fast
wind to the next index mark.

4. Press 

STOP

 or 

PLAY

 when you reach the desired

Index mark or see the section of tape you want.

1. Use 

DECK SELECT

 to choose the active deck.

2. With a tape in the active deck, press 

INDEX

 on the

remote control. The INDEX menu will appear on
your screen.

3. Use the numerical keys to enter an index value.

This value is the number of Index marks you want
the VCR to count before it stops.

Note: Enter a 0 first for Index marks 1-9.

4. Press 

FF

 to search for Index marks forward, or

PLAY

 to search for Index marks in reverse. The

Index Search display will appear and the deck
will start to fast wind. When the VCR reaches
the indicated Index mark, it will stop and play
the tape.