Intermate iSeries Manuale Utente
User’s Manual for InterForm400®
149
M WARNING M
Even though *DEFAULT is the default value it is most likely WRONG. *DEFAULT will
place the temporary spooled files on the outq where the printer is attached and making it
impossible to make them run through the P=Send E-mail function.
place the temporary spooled files on the outq where the printer is attached and making it
impossible to make them run through the P=Send E-mail function.
Form type:
The form type entered here should be used as condition for a 1.
Merge with overlay following this AFC definition. The formtype
could typically be FNSHREADY (Finish ready).
Merge with overlay following this AFC definition. The formtype
could typically be FNSHREADY (Finish ready).
If you use an E-mail finishing definition this screen will appear:
Seqnbr Function
10.0 C Prepare for Finishing
Prepare for E-mail requires settings for
print that will not be send.
Output queue non E-mail print . __________
Library . . . . . . . . . . . __________
Form type . . . . . . . . . . . __________
F3=Exit F12=Cancel
On this screen you specify on which output queue you want to place the pages, that
cannot be e-mailed (no receiver was found). This should normally be an AFC monitored
output queue so that a InterForm400
cannot be e-mailed (no receiver was found). This should normally be an AFC monitored
output queue so that a InterForm400
®
merge and print can be done.
M WARNING M
Make sure, that you are not creating a loop in Auto Forms Control when you insert a
finishing definition. If you e.g. create new spooled files with a finishing definition and
these new spooled files are placed back on the same outq, then the new spooled file(s)
should NOT be able to trigger the finishing definition again...
finishing definition. If you e.g. create new spooled files with a finishing definition and
these new spooled files are placed back on the same outq, then the new spooled file(s)
should NOT be able to trigger the finishing definition again...
D=Sort Spooled File
Seqnbr Function
2,0 D Sort Spooled File
Sort definition name . . . . . . __________
Outque for sorted print . . . . *DEFAULT__
Library . . . . . . . . . . . __________
Form type . . . . . . . . . . . __________
F3=Exit F11=Delete F12=Cancel
This function is used to sort the spool entry accoding to criteria defined in a Sort
Definition. Refer to section Sort Definitions page 230 for more information.
Definition. Refer to section Sort Definitions page 230 for more information.
Sort Definition
Name:
Name:
The Sort definition name.
Output queue/
library:
library:
Output from the Sort process will be a new SCS spool entry. If a
default queue has been defined, the keyword *DEFAULT will be
preset for this field. This is overwritten when entering a queue and
a library here. *INPUT in this field Indicates that the new spool
entry must be written to the same output queue where the input
spool entry exists.
default queue has been defined, the keyword *DEFAULT will be
preset for this field. This is overwritten when entering a queue and
a library here. *INPUT in this field Indicates that the new spool
entry must be written to the same output queue where the input
spool entry exists.