Hobart ML-29032 Manuale Utente
Quantum Scale System
3 - 5
Start-Up Procedures
Checking Date & Time
QUICK STEPS
From the Start a Run Screen:
1.
1.
PRESS [F1]
2.
Verify Date & Time is
accurate.
accurate.
3.
PRESS [ESC]
To check Date & Time to see that they are correct:
1.
From the Start a Run Screen, PRESS [F1].
2.
Verify the Date/Time is accurate.
3.
PRESS [ESC] to return to the Start a Run Screen.
Changing Date & Time
QUICK STEPS
From the Start a Run Screen:
1.
1.
PRESS [F1]
2.
TYPE the Current Date
3.
PRESS [ENTER] or [▼]
4.
TYPE the Current Time.
5.
PRESS [F1] - If Needed
6.
PRESS [ESC]
To change the Date & Time in the event that it is incorrect:
1.
From the Start a Run Screen, PRESS [F1].
2.
TYPE the current Date as a six-digit number
(MM/DD/YY).
(MM/DD/YY).
3.
PRESS [ENTER] or [DOWN ARROW (▼)] to move the
cursor to the Time field.
cursor to the Time field.
4. TYPE the current Time. Enter the Time as a four-digit
number (HH:MM).
5. If you need to change AM or PM, PRESS [F1] to select
the correct time of day.
6. When the Date and Time is correct, PRESS [ESC] to save
the changes and return to the Start a Run Screen.