Lexmark d02 Manuale Utente
6
Press the arrow buttons until On [1,2,1,2,1,2] or Off [1,1,1,2,2,2] appears, and then press
to
select one.
7
Press
.
8
If you placed the document on the scanner glass and have additional pages to copy, then place the next page
on the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.
on the scanner glass, and then press 1 on the keypad. Otherwise, press 2 on the keypad.
9
Press
to return to Ready.
Placing separator sheets between copies
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
in the TCP/IP section.
2
Click Settings.
3
Click Copy Settings.
4
Click Separator Sheets.
Note: Collate must be On for the separator sheets to be placed between copies. If Collate is Off, then the separator
sheets are added to the end of the print job.
sheets are added to the end of the print job.
5
Select one of the following:
•
Between pages
•
Between copies
•
Between jobs
6
Click Submit.
Copying multiple pages onto a single sheet
In order to save paper, you can copy either two or four consecutive pages of a multiple-page document onto a single
sheet of paper.
sheet of paper.
Notes:
•
The Paper Size must be set to Letter, Legal, A4, or B5 JIS.
•
The Copy Size must be set to 100%.
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Copy button.
4
Press the Options button.
5
Press the arrow buttons until Paper Saver appears, and then press
.
Copying
76