Timex 111-095009 Scheda Tecnica

If your watch is water-resistant, meter marking

(WR_M) is indicated.

*pounds per square inch absolute
WARNING: TO MAINTAIN WATER-RESISTANCE,
DO NOT PRESS ANY BUTTONS OR PULL OUT 
THE CROWN UNDER WATER UNLESS YOUR
WATCH IS INDICATED AS 200 METER WATER-
RESISTANT.

To start your watch remove the plastic guard from

under the crown, then press the crown in against 

the case. The second hand will begin advancing in

one-second intervals.
Some deep-depth water-resistant watches require

the setting crown to be screwed in to secure  

water-resistance. If your watch case has a protrusion

with screw threads, the crown must be screwed in

after setting the watch.
To screw in, push the crown firmly against the

threaded protrusion and hold in while turning the

crown clockwise. Continue to screw in the crown

until it is tight. You will need to unscrew the crown

(counter-clockwise) before pulling it out the next time

you want to set your watch. 

30m/98ft

60

50m/164ft

86

100m/328ft

160

200m/656ft

284

W217_NA_EN_analoglayout_4  3/9/10  9:52 AM  Page 2