Siemens 4010 Manuale Utente
80
Gigaset 4010 Comfort, GBR, A31008-G4010-B102-1-7619
anha.fm
11.6.01
Call charges are not dis-
played
played
Charges per unit = 0
Set call charges per unit
(page 41)
(page 41)
You cannot hear
The key
was
pressed – the micro-
phone is “muted”
phone is “muted”
Press
S
, to activate
the microphone
The incoming call
number is not displayed
although CLIP is set.
number is not displayed
although CLIP is set.
The telephone number
transmission is blocked
transmission is blocked
The callers must permit
the transmission of
their telephone num-
bers at their network
provider
the transmission of
their telephone num-
bers at their network
provider
The ringer/dialling
tone cannot be heard.
tone cannot be heard.
You have changed the
telephone cord on
your Gigaset.
telephone cord on
your Gigaset.
Ensure, when pur-
chasing a new cord,
that it has the correct
pin assignment (3-4
assignment of the tel-
ephone leads/EURO
CTR37).
chasing a new cord,
that it has the correct
pin assignment (3-4
assignment of the tel-
ephone leads/EURO
CTR37).
Error beep is generat-
ed (descending tone
sequence)
ed (descending tone
sequence)
Wrong input
Repeat the proce-
dure; note the display
and, if necessary, re-
fer to the operating in-
structions
dure; note the display
and, if necessary, re-
fer to the operating in-
structions
Fault
Possible cause
Solution