Motorola G24 Manuale Utente
![Motorola](https://files.manualsbrain.com/attachments/83de88ba2280e7232128e8931d7cbd2a38dcc654/common/fit/150/50/0293f422c4d32e7e0f777d5e11bc33c83ea5627f71ddf155374c02a23d9a/brand_logo.png)
Chapter 3: AT Commands Reference
December 31, 2007
AT Commands Reference Manual
3-139
Example
AT+MCSAT=?
+MCSAT:(0-2)
OK
AT+MCSAT?
+MCSAT: 1
OK
AT+MCSAT=2
OK
AT+MCSAT=1,00001000 // UCS2
OK
AT+MCSAT=1,00000100 // UTF8
OK
AT+MCSAT=1,00000000 // GSM
OK
AT+MCSAT=1
OK
AT+MCSAT=0
OK
+MEDT, Motorola Enable/Disable Tone
This command enables/disables the G24 tones.
This command is a basic command.
This feature is active by default.
In MUX mode, this AT command is allowed on DLC2 only.
Note:
The MEDT command supports only one of the following tones:
•"Welcome" tone - appears at power up.
•"Goodbye" tone - appears at shut down.
•Devices connect / disconnect tones - the tone which appears each time a device is
connected / disconnected to/from the G24. As a device we consider: Headset, Stereo
headset, USB bus, Speakers.
headset, USB bus, Speakers.
•On / off tones - appears when pushing the on/off button.
Command
Type
Syntax
Response/Action
Remarks
Set
+MEDT=<mode>
OK
Or:
+CME ERROR: <err>
The set command configures the tones
mode.
mode.
Read
+ MEDT?
+MEDT: <mode>
OK
The read command returns the current
setting.
setting.
Test
AT+MEDT=?
+MEDT: (list of
supported < mode >s )
OK
The test command returns the possible
ranges of <mode>s.
ranges of <mode>s.