Motorola G24 Manuale Utente
Audio
3-242
AT Commands Reference Manual
December 31, 2007
+MAMUT, Input Devices Mute
This command controls the muting/unmuting of all input paths (mic, headset mic or digital RX).
Upon power up, all the devices are unmuted.
Upon power up, all the devices are unmuted.
The following table shows the +MAMUT parameters.
Example
AT+MAMUT=2,0//Accy=2 (headset mic), state=0 (unmute)
OK
AT+MAMUT=5,1//Accy=5 (mic + Digital RX), state=1 (mute)
OK
AT+MAMUT?
+MAMUT: 1,1//Accy=1 (mic), state=1 (mute)
+MAMUT: 2,0//Accy=2 (headset mic), state=0 (unmute)
+MAMUT: 4,1//Accy=4 (Digital RX), state=1 (mute)
AT+MAMUT=?
+MAMUT: (1-7),(0,1)
OK
Command
Type
Syntax
Response/Action
Remarks
Set
+MAMUT=<accy>,
<state>
OK
or:
+CME ERROR: <err>
The Set command mutes/unmutes
any input accessory or any
combination of them.
any input accessory or any
combination of them.
Read
+MAMUT?
+MAMUT:<accy1>,<state>
+MAMUT:<accy2>,<state>
+MAMUT:<accy4>,<state>
OK
The Read command returns the
current mute/unmute state of all the
input accessories.
current mute/unmute state of all the
input accessories.
Test
+MAMUT=?
+MAMUT:(<accy>
range),(<state> range)
The Test command returns the mute
states available and the output
accessories supported.
states available and the output
accessories supported.
Table 3-158: MAMUT Parameters
<Parameter>
Description
<accy> (1-7)
1
Mic
2
Headset mic
4
Digital RX
<state>
0
Unmute
1
Mute