Panasonic 700 Guida Utente
Chapter 4. Key Telephone Features
Section 700 - Operation
4-100
DBS Manual - Revised April 2000
DBS-2.3/9.2-700
Programming
The Voice Mail Transfer Key may be assigned from a phone or through
system programming.
system programming.
To assign a Voice Mail key from a phone:
1. Press
the
ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press
PROG.
3. Press the FF key to be assigned as a Voice Mail Transfer Key.
4. Press
CONF AUTO AUTO.
5. Enter the Voice Mail pilot number.
6. Enter any special codes required by the voice mail system.
Note: The length of the Voice Mail pilot number and special codes
combined cannot exceed six digits. If the VM number and the special
codes require more than six digits, assign the special codes to a personal
or system speed dial number and enter AUTO followed by the speed dial
bin number.
combined cannot exceed six digits. If the VM number and the special
codes require more than six digits, assign the special codes to a personal
or system speed dial number and enter AUTO followed by the speed dial
bin number.
7. Press
the
HOLD key.
8. Press
the
ON/OFF key.
• The ON/OFF LED goes off.
Related Programming
• FF5 (FF Key Programming): FF Key Assignments
Considerations
Key Assignment. The VM/TRF key can be assigned to any key phone, DSS/
72 or EM/24. The VM/TRF key cannot be assigned to a One-Touch key.
72 or EM/24. The VM/TRF key cannot be assigned to a One-Touch key.
Transfers. The VM/TRF key can be used to transfer intercom as well as CO
calls to a voice mailbox.
calls to a voice mailbox.