Omega 24 Manuale Utente

1. While in the CALIB OPR mode, set-ups saved earlier in memory can be

recalled to program the calibrator output. First depress the RECALL key
to recall a set-up.

1.

Note that the RCL annunciator turns on, OPR turns off, and all memory
locations annunciators are blanked.

2. Next hit the key with the number corresponding to the desired memory

location. The corresponding annunciator turns on, and the LCD updates
to show the new calibrator setting.

eg. RECALL 8

3. Several stored set-ups can be randomly recalled by a key sequence such

as:

eg. RECALL 6

eg. 

RECALL 3

eg. 

RECALL 9

eg. 

etc.

4. To return the unit to the CALIB OPR mode after recalling the last set-up,

hit the OPR key.

• Any other key except ON/OFF and CLEAR will also return the

OPR mode.

• Set-ups recalled from unused locations will display and output

0°.

• Calibrator set-ups can be recalled even when the unit is func-

tioning in the meter mode. The same 10 storage locations are
shared in both meter and calibrator modes.

• Readings stored in memory while operating as a METER, can

be recalled in the CALIB mode. In this unusual application, the
unit generates calibrator outputs that simulate earlier stored
meter inputs.

1. Individual set-up locations can be erased by recalling the location followed

by a hit to the CLEAR key.

eg. RECALL 5

eg. 

CLEAR

21