Barco K5902007 - 00 Manuale Utente
First installation
21
2.2 Installation of the hardware
MediCal Pro can be used on any viewing station that runs on Windows
NT4, Windows 2000 Professional or Windows XP Professional. The
viewing station can contain any number of displays, Barco and non-Barco
displays.
It is impossible to describe the installation on all these systems in this
manual, but we can give some important hints and rules to follow during
the installation of the hardware.
For a detailed description of the installation, please refer to the system
manual or display user manual.
NT4, Windows 2000 Professional or Windows XP Professional. The
viewing station can contain any number of displays, Barco and non-Barco
displays.
It is impossible to describe the installation on all these systems in this
manual, but we can give some important hints and rules to follow during
the installation of the hardware.
For a detailed description of the installation, please refer to the system
manual or display user manual.
Barco flat panel display installation
In case of a DVI connection:
Connect the DVI cable of each display to a different imaging board head
inside the viewing station’s computer.
The leftmost display must be connected to head A, the second leftmost
display to head B, etc.
You do not need to set the addresses of the flat panel displays.
inside the viewing station’s computer.
The leftmost display must be connected to head A, the second leftmost
display to head B, etc.
You do not need to set the addresses of the flat panel displays.
Barco CRT display installation
1 Address setting: Each Barco display you wish to include in the
configuration for Q/A checks must get a different remote address.
It is logical to assign address 1 to the leftmost display, 2 to the second
leftmost display, etc.
It is logical to assign address 1 to the leftmost display, 2 to the second
leftmost display, etc.
Vid1
Vid2
COM port
Remote In
Remote In
Remote Out