Brother BCL-D70 Manuale Utente
Chapter 1
4
j
Enter the registered 4-digit PIN number
of the machine (base unit) (The factory
setting is “0000”.) by pressing the dial
pad on the control panel of the cordless
handset.
Press Menu/OK.
of the machine (base unit) (The factory
setting is “0000”.) by pressing the dial
pad on the control panel of the cordless
handset.
Press Menu/OK.
Note
• If you hear three short beeps, the cordless
handset did not register. Try to register the
cordless handset again.
cordless handset again.
• If you want to install another cordless
• You can change the PIN number. (See
• You may register GAP (Generic Access
Profile) compatible DECT™ handsets to
your machine (base unit). Follow steps a
through f, then refer to your handset
documentation to complete the
registration. Functions are limited to
making and receiving external calls. Some
handsets may not work with your
machine.
your machine (base unit). Follow steps a
through f, then refer to your handset
documentation to complete the
registration. Functions are limited to
making and receiving external calls. Some
handsets may not work with your
machine.
k
Press Stop/Exit on the control panel of
the machine (base unit).
the machine (base unit).
Deregistering cordless
handsets
handsets
1
You can deregister your cordless handset.
If you are using more than one cordless
handset, deregistration will remove all
handsets registered with the machine (base
unit).
If you are using more than one cordless
handset, deregistration will remove all
handsets registered with the machine (base
unit).
a
Press MENU on the touchscreen of the
machine (base unit).
machine (base unit).
b
Press a or b to display Initial
Setup
Setup
.
c
Press Initial Setup.
d
Press a or b to display Register
Handset
Handset
.
e
Press Register Handset.
f
Press Terminate.
Press Yes to confirm.
Press Yes to confirm.
g
Press Stop/Exit.