Lenmar Enterprises BCGS320K/W Manuale Utente

Model: BCGS320K/W

Halo - Samsung Galaxy S III Power Case

PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT 

OPERATING INSTRUCTIONS FOR YOUR UNIT.

Thank you for purchasing the Halo. The Halo case offers the convenience of an external battery built into 

the full protection of a hard case. You can use it as a case all the time and enjoy the convenience of extra 

battery power when you need it.

 

Halo, USB charging / sync cable and user manual

Note: Prior to initial use, fully charge your Halo before 

connecting to your Samsung Galaxy S III.

You can charge the Halo case with the Micro USB to USB 

cable included with the case. Just plug the Micro USB into 

the case, and the other USB end into a computer USB port or 

into a wall plug style adapter that has a USB output. 

The LED status indicator shows the current charging status 

of the case. The case charges, from left to right, the 1st LED, 

2nd LED, 3rd LED and finally the 4th LED. Once the 4th LED 

has become steady, the charging process has finished.  

Your Halo will always drain first until its power is 5%, and then 

your Samsung Galaxy S III switches to its main battery.

Place the Samsung Galaxy S III facing you into the back half 

of the Halo, slide down until flush with the case. Then align 

the top cover paying attention that the slot for the 

headphone jack is on the top of the phone. Snap together 

starting from the top to the bottom. 

Just plug the Micro USB into the Halo, and the other USB 

end into a computer USB port or into a wall plug style 

adapter that has a USB output. 

With the Halo connected to the Samsung Galaxy S III 

charging is as follows. First the Samsung Galaxy S III will 

be charged fully and then the Halo begins to charge.

With the built in “ON / OFF” button you have the option of using the Halo when 

you need it. When you need an extra charge in your phone, just push the button 

and hold for two seconds to turn “ON” and the Halo case will proceed to charge 

your main battery. When you are ready to turn it “OFF,” just hold the button again 

for two seconds and the Halo will shut “OFF.”

The integrated LED status indicator tells you exactly how much battery power is 

left in your case. Simply press the “ON / OFF” button. The 1st LED will indicate 

25% or less charge remaining, the 2nd LED will indicate between 25 – 50% 

charge remaining and the 3rd LED will indicate 50 -75% charge remaining, and 

the 4th LED will indicate 75-100% charge remaining.

Using the supplied cable enjoy the convenience of charging and syncing your 

Samsung Galaxy S III without ever removing the case.  Just plug the Micro USB 

cable into the case and the other end into your computer’s USB slot.

Cell type:

Input:

Output:

Capacity:

Dimensions:

Weight:

Compatibility:

Lithium-Polymer Battery
DC 5V/1A
DC 5V/1A
2000mAh / 7.4Wh
L147.5 x W74.4 x T15.5mm
85g
Samsung Galaxy S III

Standby:

Talk Time:

Internet Use:

Audio Play:

Video Play:

Up to 85 hours* 
Up to 7 hours and on the 3G network. 
Up to 8 hours on the 2G network.
Up to 7 hours and on the 3G network. 
Up to 8 hours on Wi-Fi.
Up to 30 hours*
Up to 8 hours*

*All above times can vary due to device settings, location, and signal strength.

313-053-07-0617 r1.1 y1

Lithium-Polymer battery must be

recycled or disposed of properly.

On/Off Button

LED Indicators

Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original 

date of purchase when sold through our website or our authorized retailers. Warranties are not transferable. The 

warranty excludes damage resulting from accident, misuse, modification, delay or loss of use, damage to 

equipment or by normal wear and tear.

ALL WARRANTY CLAIMS ARE PROCESSED ONLINE AT THE FOLLOWING LINK:

WWW.LENMAR.COM/WARRANTY

Warranty claims made after 60 days from the original date of purchase, will require a processing fee. Details will 

be included while completing the online warranty request. Payment can be made via credit card when 

completing the warranty form or a check can be included with the package when it is returned to Lenmar. Once 

the request is completed, you will be emailed with a confirmation WRA number and instructions on how to 

return the item for a warranty replacement. 

The following statement is required in the state of California pursuant to the settlement of an action brought 

by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers

For additional questions, comments, or to explore other Lenmar power solutions, 

visit our website at: www.lenmar.com or call 800.424.2703 from 9AM – 5PM PST.

USB

USB

USB

Headphone Slot

TOP

COVER

Micro-USB Charging Jack

Micro-USB Charging Jack

4

3

2

1