Lenmar Enterprises BCGS324K/W Manuale Utente

Model: BCGS324K/W

Pulsar - Samsung Galaxy S III Power Case

PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT 

OPERATING INSTRUCTIONS FOR YOUR UNIT.

Thank you for purchasing the Pulsar. The Pulsar case offers the convenience of an external battery built 

into the full protection of a hard case. You can use it as a case all the time and enjoy the convenience of 

extra battery power when you need it.

 

Pulsar, USB charging / sync cable and user manual

Note: Prior to initial use, fully charge your Pulsar before 

connecting to your Samsung Galaxy S III.

You can charge the Pulsar case with the Micro USB to USB 

cable included with the case. Just plug the Micro USB into 

the case, and the other USB end into a computer USB port or 

into a wall plug style adapter that has a USB output. 

The LED status indicator shows the current charging status 

of the case. The case charges, from right to left, the 1st LED, 

2nd LED, 3rd LED and finally the 4th LED. Once the 4th LED 

has become steady, the charging process has finished.  

Your Pulsar will always drain first until its power is 5%, and then your 

Samsung Galaxy S III switches to its main battery.

With the Samsung Galaxy S III facing you, align your phone 

micro-USB jack just above the micro USB tip in the Pulsar.

Gently slide down until the top of the phone sets itself 

into the case.  

Just plug the Micro USB into the Pulsar, and the other 

USB end into a computer USB port or into a wall plug 

style adapter that has a USB output. 

With the Pulsar connected to the Samsung Galaxy S III 

charging is as follows. First the Samsung Galaxy S III will 

be charged fully and then the Pulsar begins to charge.

With the built in “ON / OFF” button you have the option of using the Pulsar when 

you need it. When you need an extra charge in your phone, just push the button 

and hold for two seconds to turn “ON” and the Pulsar case will proceed to charge 

your main battery. When you are ready to turn it “OFF,” just hold the button again 

for two seconds and the Pulsar will shut “OFF.”

The integrated LED status indicator tells you exactly how much battery power is 

left in your case. Simply press the “ON / OFF” button. The 1st LED will indicate 

25% or less charge remaining, the 2nd LED will indicate between 25 – 50% 

charge remaining and the 3rd LED will indicate 50 -75% charge remaining, and 

the 4th LED will indicate 75-100% charge remaining.

Using the supplied cable enjoy the convenience of charging and syncing your 

Samsung Galaxy S III without ever removing the case.  Just plug the Micro USB 

cable into the case and the other end into your computer’s USB slot.

Cell type:

Input:

Output:

Capacity:

Dimensions:

Weight:

Compatibility:

Lithium-Polymer Battery
DC 5V500mA
DC 5V500mA
2400mAh / 8.9Wh
L152 x W70.4 x T14.6mm
90g
Samsung Galaxy S III

Standby:

Talk Time:

Internet Use:

Audio Play:

Video Play:

Up to 230 hours* 
Up to 7.6 hours and on the 3G network. 
Up to 8.8 hours on the 2G network.
Up to 7.6 hours and on the 3G network. 
Up to 7 hours on Wi-Fi.
Up to 31 hours*
Up to 8.8 hours*

*All above times can vary due to device settings, location, and signal strength.

313-054-07-0617 r1.1 y1

Lithium-Polymer battery must be

recycled or disposed of properly.

LED Indicators

On/Off Button

Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original 

date of purchase when sold through our website or our authorized retailers. Warranties are not transferable. The 

warranty excludes damage resulting from accident, misuse, modification, delay or loss of use, damage to 

equipment or by normal wear and tear.

ALL WARRANTY CLAIMS ARE PROCESSED ONLINE AT THE FOLLOWING LINK:

WWW.LENMAR.COM/WARRANTY

Warranty claims made after 60 days from the original date of purchase, will require a processing fee. Details will 

be included while completing the online warranty request. Payment can be made via credit card when 

completing the warranty form or a check can be included with the package when it is returned to Lenmar. Once 

the request is completed, you will be emailed with a confirmation WRA number and instructions on how to 

return the item for a warranty replacement. 

The following statement is required in the state of California pursuant to the settlement of an action brought 

by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers

For additional questions, comments, or to explore other Lenmar power solutions, 

visit our website at: www.lenmar.com or call 800.424.2703 from 9AM – 5PM PST.

USB

USB

USB

Micro-USB Charging Jack

Micro-USB Charging Jack

1

2

3

4