3M 2550 Manuale Utente

Pagina di 70
78-9000-0192-2 Rev C 
29
Display 3.  As the receiver antenna crosses the target, the receiver volume increases to 
a maximum, the signal strength will be at its maximum and the directional 
arrow will become a straight line that is closely lined up with the target line 
on the display. See following examples;
On Target Path
Display 4.  A circle consisting of two arrows appears when the orientation of the receiver 
is not at the optimum position in relation to the target. The arrows indicate 
that the receiver should be twisted to obtain the optimum position. See 
following examples;
Twist Receiver
B. Special Peak (Spl Pk)
TRACE [2] + Mode [SK] + Spl Pk [SK Toggle] or 
Menu/OK [5] + Cable/Pipe [SK] + Mode [SK] + Spl Pk [SK Toggle]
Special Peak mode turns on only the peak antenna closest to the ground. Special Peak 
Mode is used in applications such as very deep cables or pipes, or when the signal is too 
weak for Directional Peak (Dir Pk) or Trace View (T-View) mode tracing.
Left or Right of Target Path
Directly Over Target Path
C. Induction Peak (Ind Pk)
TRACE [2] + Mode [SK] + Ind Pk [SK Toggle] 
or Menu/OK [5] + Cable/Pipe [SK] + Mode [SK] + Ind Pk [SK Toggle]
If you cannot make a direct connection, or use the 3M
 Dyna-Coupler clamp to apply 
a locating signal on the target, use the induction method. This method uses the internal 
coil of the transmitter to generate a magnetic field.