Transition Networks J/FE-CF-03 Manuale Utente

Pagina di 7
USER’S GUIDE
J/FE-CF-03
Stand-Alone media converter
• 
Fast Ethernet™
• Copper to Fiber
• 100Base-TX to 100Base-FX
Transition Networks J/FE-CF-03 Fast
Ethernet™ media converter connects 100
Mb/s twisted-pair copper cable to a duplex
100 Mb/s fiber-optic cable.
Use the J/FE-CF-03 series media converter
(or up to two media converters in series)
to extend over fiber, the distance between two 100BASE-TX devices (hub, switch,
workstation, etc.).  
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
J/FE-CF-03
RJ-45, 100Base-TX
100 m (328 ft)*
ST, 100Base-FX, 1300 nm multimode
2 km (1.2 miles)*
J/FE-CF-03(SC) RJ-45, 100Base-TX
100 m (328 ft)*
SC , 100Base-FX, 1300 nm multimode
2 km (1.2 miles)*
J/FE-CF-03(SM) RJ-45, 100Base-TX
100 m (328 ft)*
SC, 100Base-FX, 1300 nm singlemode
20 km (12.4 miles)*
J/FE-CF-03(LH) RJ-45, 100Base-TX
100 m (328 ft)*
SC, 100Base-FX, 1300 nm singlemode 
40 km (24.9 miles)*
Part Number
Port One - Copper
Port Two - Duplex Fiber-Optic
J/FE-CF-03-100 RJ-45, 100Base-TX
100 m (328 ft)*
SC, 1310 mn TX/1550 nm RX, 20 km
(12.4 miles)*
J/FE-CF-03-101 RJ-45, 100Base-TX
100 m (328 ft)*
SC, 1550 mn TX/1310 nm RX, 20 km
(12.4 miles)*
*Typical maximum cable distance.  Actual distance is dependent upon the physical
characteristics of the network installation.
Note:  Install the J/FE-CF-03-100 and the J/FE-CF-03-101 in the same network as local
and remote peers.
Installation . . . . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . . . . .5
Cable Specifications  . . . . . . . . . . . . .6
Technical Specifications  . . . . . . . . . .7
Troubleshooting  . . . . . . . . . . . . . . . .8
Contact Us . . . . . . . . . . . . . . . . . . . . .9
Compliance Information  . . . . . . . . .11
Single Fiber Optic (install as a pair)