Manualsbrain.com
  1. Manuali
  2. Marche
  3. Panasonic
  4. AJ-HPM110E
  5. Manuale Utente

Panasonic AJ-HPM110E Manuale Utente

Scarica
Pagina di 168
134
Setup: Item Settings
684
EDH(SD)
0000
0001
OFF
ON
Specifies whether or not EDH is superimposed on SDI OUT signals.
0: Signals are not superimposed.
1: Signals are superimposed.
685
ESR MODE(SD)
0000
0001
OFF
AUTO
Specifies the operating mode for edge subcarrier reduction (ESR) in the playback circuit. 
0: ESR is forcibly set to off. 
1: ESR is automatically turned on and off depending on operating mode.
688
CC REC
0000
0001
OFF
ON
Specifies whether or not the closed caption signal that is superimposed on the SD SDI 
and analog composite input signals will be recorded. 
0: Not recorded.
The EE output is also blanked.
1: A closed caption signal that is superimposed on an input signal is recorded.
NOTE: 
• When 1394 is selected as the input signal, the closed caption signal superimposed 
on the compressed input signal is recorded in its original form regardless of settings 
in this menu.
689
COMP MODE
0000
0001
NORMAL
DARK
Selects the compression method used during video recording. 
0: Records using normal compression processing. 
1: Records video suppressing compression video distortion that is generated by dark 
areas that are about 10 IRE (70 mV) or less. 
NOTE:
This setting is available in DVCPRO HD 720p mode recording.
690
UMID REC
0000
0001
OFF
ON
Specifies whether or not UMID data should be recorded. 
0: UMID data is not recorded.
1: Recorded.
691
UMID GEN
0000
0001
INT
EXT
Specifies the generation method of UMID information that is recorded when menu No. 
690 UMID REC is set to on. 
0: Newly created UMID information is always recorded.
1: Records UMID data superimposed on the input signal. 
Newly created UMID information is recorded when not superimposed on an input 
signal.
692
UMID POS
0000
0001
:
0006
:
0008
BLANK
12L
:
17L
:
19L
Specifies the line that superimposes UMID data. 
NOTE: 
• You cannot select the same line as in menu No. 501 VITC POS-1 and No. 502 
VITCPOS-2. 
• Holding down the SHIFT button and pressing the RESET button will not restore the 
factory defaults. 
• UMID data is output before recorded VANC data. To output VANC data, set UMID 
POS to a line other than that which superimposed the data or select “BLANK.”
• During playback of DVCPRO HD native clip, UMID becomes NO-INFO.
Item
Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER 
DISP.
59.94Hz
50Hz
29.97Hz
25Hz
60-25Hz
only
59.94Hz
29.97Hz
only
59.94Hz
only
59.94Hz
50Hz
29.97Hz
59-23Hz
60-24Hz
25Hz
60-25Hz
only