Philips PET727/94 Manuale Utente
Philips Portable DVD Player PET727
Quick Start Guide
1
Charge the built-in battery
1 Switch the
ON/OFF
slide selector to the
OFF
position.
2 Connect the supplied AC adaptor to the
DC IN 12V
socket on the
DVD Player and to the AC outlet.
The red charge indicator turns on. It takes about 4 hours to fully
charge the battery.
When the battery is fully charged, the red charge indicator turns off.
When the battery is fully charged, the red charge indicator turns off.
Tip
–
–
You can only charge the battery when the temperature is between 0°C
and 35°C.
and 35°C.
–
When headphones are connected to the DVD Player, the fully charged
battery lasts about 2.5 hours.
battery lasts about 2.5 hours.
2
Install remote control battery
1 Open the battery compartment.
2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3 Close the battery compartment.
2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3 Close the battery compartment.
CR2025
1
CR2025
2
3
Play discs
1 Lift the display panel.
2 Switch the
2 Switch the
OPEN
slide selector to the right to open the disc
compartment.
• (For the fi rst time) Remove the protective card.
3 Insert a disc with the printed side facing up.
4 Push the lid down to close the disc compartment.
4 Push the lid down to close the disc compartment.
Disc starts to play automatically. If not, press
OK
or 2; .
If a menu appears, select an item and then press
OK
to start play.
4
Connect a TV
On the DVD Player,
1 Connect the black end of the supplied AV cable to the
1 Connect the black end of the supplied AV cable to the
AV OUT
socket.
On the TV,
1 Connect the white end to the left audio input socket and the red
1 Connect the white end to the left audio input socket and the red
end to the right audio input socket.
2 Connect the yellow end to the video input socket.
TV
AUDIO IN
VIDEO IN
PET727_94_QSG_V2.0
PET727_94_QSG_V2.0.indd 1
PET727_94_QSG_V2.0.indd 1
2010-4-28 10:47:19
2010-4-28 10:47:19