Hitachi VT-F370A Manuale Utente
Getting Started
15
Getting
Started
(Hookups
cont.)
pg.
12
External or Internal 300 Ohm Antenna
If you have either an external or internal (rabbit ears) antenna rather than cable, you may have 300 ohm
connectors like these.
If you have either an external or internal (rabbit ears) antenna rather than cable, you may have 300 ohm
connectors like these.
In this case, you will need special adapters to make the 75 ohm round wire connection shown below.
(You may already have one on your TV.)
1. Remove the antenna line from the back of your TV if it is already connected there, or take it from where
it comes in on the wall.
2. Considering the three pictures below, determine which adapter you will need to hook it into your VCR.
(You may already have one on your TV.)
1. Remove the antenna line from the back of your TV if it is already connected there, or take it from where
it comes in on the wall.
2. Considering the three pictures below, determine which adapter you will need to hook it into your VCR.
If you have
Use this adapter
Single 300 ohm flat wire
Separate UHF and VHF
antenna wires, both 300 ohm flat wire
300 ohm flat UHF and 75 ohm
round VHF