Roland AR-200 Manuale Utente
59
MIDI Implementation
Appendices
●
MIDI Time Code
❍
Full Messages
*
Data is received when Sync Source is set to "MTC." When the Quarter Frame message is
received, operation proceeds with the start of the song synchronized to
"00h00m00s00f00" with the "MTC Offset" and the "Delay Time" added.
received, operation proceeds with the start of the song synchronized to
"00h00m00s00f00" with the "MTC Offset" and the "Delay Time" added.
*
This acts upon the currently selected audio phrase.
*
MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.
Status
Data Bytes
Status
F0H
7FH, dev, 01H, 01H, 06H,
F7H
01H, hrH, mnH, scH, frH
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Real time Header
dev
device ID (or 7FH)
01H
sub-ID#1 (MIDI Time Code)
01H
sub-ID#1 (Full Messages)
06H
number of bytes
01H
[TARGET] sub command
hrH
Hours Count
xyyzzzzz
x Reserved (0)
yy Time Code type
0 = 24 Frames / Sec
1 = 25 Frames / Sec
2 = 30 Frames / Sec (Drop Frame)
3 = 30 Frames / Sec (Non Drop Frame
zzzzz Hours (0-23)
x Reserved (0)
yy Time Code type
0 = 24 Frames / Sec
1 = 25 Frames / Sec
2 = 30 Frames / Sec (Drop Frame)
3 = 30 Frames / Sec (Non Drop Frame
zzzzz Hours (0-23)
mnH
Minutes Count
xxyyyyyy
xx Reserved (00)
yyyyyy Minutes (0-59)
xx Reserved (00)
yyyyyy Minutes (0-59)
scH
Seconds Count
xxyyyyyy
xx Reserved (00)
yyyyyy Seconds (0-59)
xx Reserved (00)
yyyyyy Seconds (0-59)
frH
Frame Count
xxxyyyyy
xxx Reserved (000)
yyyyy Frame No.(0-29)
xxx Reserved (000)
yyyyy Frame No.(0-29)
F7H
EOX (End of Exclusive)
●
MIDI Machine Control (MMC)
*
This is Received when the MMC mode is set to "SLAVE."
*
This acts upon the currently selected phrase.
❍
STOP (MCS)
Status
Data Bytes
Status
F0H
7FH, dev, 06H, 01H
F7H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Real time Header
dev
device ID (or 7FH)
06H
MMC Command Message
01H
STOP (MCS)
F7H
EOX (End of Exclusive Message)
*
Playback is stopped immediately when this command is received if the device ID
matches, or if 7FH is received.
matches, or if 7FH is received.
❍
PLAY (MCS)
Status
Data Bytes
Status
F0H
7FH, dev, 06H, 02H
F7H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Real time Header
dev
device ID (or 7FH)
06H
MMC Command Message
02H
PLAY (MCS)
F7H
EOX (End of Exclusive Message)
*
Playback is started immediately when this command is received if the device ID
matches, or if 7FH is received.
matches, or if 7FH is received.
❍
DEFERRED PLAY (MCS)
Status
Data Bytes
Status
F0H
7FH, dev, 06H, 03H
F7H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Real time Header
dev
device ID (or 7FH)
06H
MMC Command Message
03H
DEFERRED PLAY (MCS)
F7H
EOX (End of Exclusive Message)
*
Playback is started immediately when this command is received if the device ID
matches, or if 7FH is received.
matches, or if 7FH is received.
❍
RECORD STROBE (MCS)
Status
Data Bytes
Status
F0H
7FH, dev, 06H, 06H
F7H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Real time Header
dev
device ID (or 7FH)
06H
MMC Command Message
06H
RECORD STROBE (MCS)
F7H
EOX (End of Exclusive Message)
*
Recording of the phrase begins when this command is received if the device ID matches,
or if 7FH is received.
or if 7FH is received.
*
If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded
with MMC).
with MMC).
❍
RECORD EXIT (MCS)
Status
Data Bytes
Status
F0H
7FH, dev, 06H, 07H
F7H
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Real time Header
dev
device ID (or 7FH)
06H
MMC Command Message
06H
RECORD STROBE (MCS)
F7H
EOX (End of Exclusive Message)
*
Recording is stopped immediately when this command is received if the device ID
matches, or if 7FH is received.
matches, or if 7FH is received.
*
If MIDI signal recording is in effect, this command is ignored (MIDI cannot be recorded
with MMC).
with MMC).
❍
LOCATE (MCP)
Format 2 - LOCATE [TARGET]
Status
Status
Data Bytes
Status
F0H
7FH, dev, 06H, 44H, 06H,
F7H
01H, hrH, mnH, scH, frH, ffH
Byte
Description
F0H
Status of Exclusive Message
7FH
Universal System Exclusive Message Realtime Header
dev
device ID (or 7FH)
06H
MMC Command Message
44H
LOCATE(MCP)
06H
Number of Bytes
01H
[TARGET] sub command
hrH
Standard time with Sub Frame
mnH
scH
frH
ffH
F7H
scH
frH
ffH
F7H
EOX (End of Exclusive Message)
*
If the device ID matches, or if 7FH is received, then when this command is received, the
location of the time code specified in the command data is located.
location of the time code specified in the command data is located.
*
MIDI phrases and pattern phrases are ignored when Dual Mono mode is selected.
AR-200_e.book 59 ページ ２００３年７月１４日 月曜日 午後１時１１分