Apple 101 Manuale Utente

Pagina di 59
44
with this.  You can buy a 3.5 stereo audio cable anywhere 
where electronics are sold.   
On your PC use a program for sound editing that edits 
sounds as well as removes channels.  One such program is 
SoundForge:  
http://www.sonymediasoftware.com/products/soundforgefa
mily.asp
.
No matter what recording application you use, make sure 
that you set the recording format to: 44Hz, 16 bit Stereo. 
PCM.  You are going to be saving the sound signal as a 
.wav file.  Choose the record option in the sound recording 
application.  On the pocket PC press the button which you 
have designated as the power signal.  Use the line out from 
the headphone jack).
Next, stop the recording and press the play button.  If you 
have recorded the signal accurately you should be able to 
hear pulsing and beeping sounds which is exactly what the 
IR signal sounds like.  If you are using the SoundForge 
application you will be able to see these sounds as a .wav 
graphic.  Now you are ready to highlight the correct 
channel and put it on mute.  Make sure that you don’t miss 
this step otherwise the sound won’t be properly through the 
IR device.  Save the sound recording this way:  44 Hx, 16