Tascam da3000 Manuale Utente

TASCAM DA-3000

4 – Recording

Setting the recording file format

You can set the recording file format, as well as sampling rate

and stereo/mono mode.
For PCM recording, you can set the format to WAV-16 or WAV-24.

For DSD recording, you can set it to DSDIFF or DSF.
When stopped, use the menu to set the file format.
1. Press the MENU button repeatedly to open the

REC FILE

menu, and turn the MULTI JOG dial to select

FILE

2. Press the MULTI JOG dial to open the

FILE TYPE

screen.

3. Turn the MULTI JOG dial to set the recording file format.

Options:
o

PCM recording: WAV-16(16-bit, Default value), WAV-24(24-bit)

DSD recording: DSDIFF, DSF

4. Press the MULTI JOG dial to confirm the selection and return

to the menu screen.

5. Turn the MULTI JOG dial to select

SAMPLE

6. Press the MULTI JOG dial to open the

SAMPLING RATE

screen.

7. Turn the MULTI JOG dial to set the sampling rate.

Options:
o

PCM recording: 44.1kHz, 48kHz (default), 88.2kHz, 96kHz,

176.4kHz, 192kHz

DSD recording: 2.8MHz, 5.6MHz

8. Press the MULTI JOG dial to confirm the selection and return

to the menu screen.

9. Turn the MULTI JOG dial to select

CHANNEL

10. Press the MULTI JOG dial to open the

CHANNEL

screen.

11. Turn the MULTI JOG dial to set the Recorded file's channel

type (Stereo File or Dual Mono File).

Options: STEREO (default), MONOx2

12. Press the MULTI JOG dial to confirm the selection and return

to the menu screen.

Using the sampling rate converter

Since this unit has a built-in sampling rate converter, you

can record at a sampling frequency that is different from the

sampling frequency of the digital input source.
Use the menu to turn the sampling rate converter (SRC) ON/OFF.
1. Press the MENU button repeatedly to open the

I/O

SETTINGS

menu, and turn the MULTI JOG dial to select

SRC

2. Press the MULTI JOG dial to open the

SRC

screen.

3. Turn the MULTI JOG dial to turn the sampling rate converter

on or off.

Options: OFF (default), ON

4. Press the MULTI JOG dial to confirm the selection and return

to the menu screen.

NOTE

• If you try to record when the digital signal input through

the DIGITAL IN connector has a sampling frequency that

is different from that set on the

SAMPLING RATE

screen

and the sampling rate converter (SRC) is off, a “-- DIN ERROR

-- Digital input is illegal.” pop-up message will appear. (See

“Setting the recording file format” on page 23.)

• The sampling rate converter (SRC) will not operate on

SDIF-3/DSD-raw input.

• The sampling rate converter can accept incoming data at

rates of 32kHz to 216kHz.