JVC NX-CDR7 Manuale Utente
– 21 –
English
NORMAL
SPEED
dB
REC LEVEL
3
2
1
CD
Good
No good
Continued
Elapsed playing time
Playing Back the Entire Discs—Continuous
Play
Play
You can play discs continuously.
1
Load discs into 3-CD Changer.
2
Select a disc, and start playback.
On the unit:
1 Press DISC repeatedly to select the disc you want.
2 Press CD
1 Press DISC repeatedly to select the disc you want.
2 Press CD
3 / 8.
On the remote control:
Press one of the disc number buttons (CD1, CD2,
and CD3).
Press one of the disc number buttons (CD1, CD2,
and CD3).
CD playback starts from the first track of the selected
disc.
• Without selecting the disc number, pressing
disc.
• Without selecting the disc number, pressing
CD
3 / 8 starts playing back the currently selected
CD.
To stop playback for a moment, press CD
3 / 8.
To resume play, press CD
3 / 8 again.
To stop during play, press
7.
To remove the disc, press the corresponding open/close
buttons (
buttons (
0 CD1, 0 CD2, or 0 CD3) on the unit.
Disc playback sequence in 3-CD Changer
When 3 discs are loaded on the disc trays, they are played in one
of the following sequences.
• When CD 1 is pressed : CD 1
of the following sequences.
• When CD 1 is pressed : CD 1
] CD 2 ] CD 3 (then stops)
• When CD 2 is pressed : CD 2
] CD 3 ] CD 1 (then stops)
• When CD 3 is pressed : CD 3
] CD 1 ] CD 2 (then stops)
* If no disc is on the disc trays, 3-CD Changer skips such an
empty tray.
If the current disc is a CD Text
You can change the information in the main display. See “To show
the text information recorded on a CD Text” on page 25.
the text information recorded on a CD Text” on page 25.
Track No.
Disc No.
The built-in 3-CD Changer can play back only finalized
CD-Rs/CD-RWs. If you play back unfinalized CDs,
“UNFINALIZE” appears in the main display.
CD-Rs/CD-RWs. If you play back unfinalized CDs,
“UNFINALIZE” appears in the main display.
Loading Discs
On the unit ONLY:
1
Press one of the open/close buttons (
0 CD1, 0 CD2,
and
0 CD3) for the disc tray you want to load a CD
onto.
The unit automatically turns on and the selected disc
tray comes out.
• If the sliding panel is left open, it moves up
The unit automatically turns on and the selected disc
tray comes out.
• If the sliding panel is left open, it moves up
automatically before the disc tray comes out.
2
Place a disc correctly on the
circle of the disc tray, with
its label side up.
circle of the disc tray, with
its label side up.
• When using a CD single (8 cm), place it on the
inner circle of the disc tray.
3
Press the same open/close button (
0 CD1, 0 CD2,
or
0 CD3) you have pressed in step 1.
The disc tray closes.
When loading more than one disc continuously
Press the open/close button (
0 CD1, 0 CD2, or 0 CD3) for the
next tray you want to place a disc onto. The first disc tray
automatically closes and the next disc tray comes out.
automatically closes and the next disc tray comes out.