JVC NX-CDR7 Manuale Utente
– 40 –
English
UNFINALIZE DISC
dB
REC LEVEL
FINALIZE DISC
3
2
1
CD-RW
UNFINALIZE DISC
3
2
1
TRACK ERASE
=
DISC ERASE
=
UNFINALIZE
=
TRACK SKIP
=
AUTO TRACK
=
TRACK SPACE
=
CONVERTER
=
Canceled
=
(back to the beginning)
Recording Track Marks Manually
—Manual Track-Marking
—Manual Track-Marking
When auto track-marking is activated (initial setting at the
factory), track marks are recorded automatically (see “Auto
track-marking” on page 29 for more details).
factory), track marks are recorded automatically (see “Auto
track-marking” on page 29 for more details).
To cancel auto-track marking and use manual track
marking, follow the procedure below.
marking, follow the procedure below.
On the remote control ONLY:
1
Press MENU repeatedly until “AUTO TRACK”
appears in the main display.
• Each time you press the button, the following menu
appears in the main display.
• Each time you press the button, the following menu
items appear as follows:
2
Press SET.
The current setting for auto-track marking appears.
The current setting for auto-track marking appears.
3
Press
¡ / ¢ or 4 / 1 to select “AUTO
TRACK OFF” then press ENTER.
The AUTO TRACK indicator goes off from the display,
and auto track-marking is canceled, and now you can
put track marks manually during recording.
• To put track marks during recording, press SET at
The AUTO TRACK indicator goes off from the display,
and auto track-marking is canceled, and now you can
put track marks manually during recording.
• To put track marks during recording, press SET at
the point where you want to put a track mark.
To restore auto track-marking, repeat steps 1 to 2 and
select “AUTO TRACK ON” then press ENTER in step 3.
• The AUTO TRACK indicator lights on the display.
select “AUTO TRACK ON” then press ENTER in step 3.
• The AUTO TRACK indicator lights on the display.
About manual track-marking
• Track marks must be recorded apart from each other by 4
seconds. If you press SET twice within 4 seconds, the second
press of the button will be ignored (only one track mark will be
recorded where you press SET for the first time).
press of the button will be ignored (only one track mark will be
recorded where you press SET for the first time).
• You cannot put track marks manually during CD Synchronized
Recording. (Auto track-marking is activated temporarily.)
Ex.: When auto-track marking is activated (initial setting)
By pressing MENU, you can use (or cancel) the following
convenient CD Recorder functions:
convenient CD Recorder functions:
AUTO TRACK: Selects either auto-track marking or
manual track marking (see the right
column.)
column.)
TRACK SPACE: Automatically places a 2-second blank
space at the beginning of each track on
a recorded disc (see page 41).
a recorded disc (see page 41).
CONVERTER:
Turns on or off the built-in sampling
frequency rate converter (see page 41).
frequency rate converter (see page 41).
TRACK SKIP:
Records a skip mark to an unwanted
track so that it will be skipped (ignored
as if it does not exist) during play (see
page 42).
track so that it will be skipped (ignored
as if it does not exist) during play (see
page 42).
TRACK ERASE: Erases the unwanted tracks on a CD-
RW (see page 42).
DISC ERASE:
Erases all the recorded tracks on a CD-
RW (see page 43).
RW (see page 43).
UNFINALIZE:
Erases the TOC (Table of Contents) of a
finalized CD-RW (see page 43).
finalized CD-RW (see page 43).
Before using the following functions explained in this
section, make sure of the following.
• The following procedures are only possible when
section, make sure of the following.
• The following procedures are only possible when
CD Recorder is selected as the source and
playback is not started.
playback is not started.
• To stop any time during the following procedures,
press CANCEL.