Addonics Technologies ST5XHPM-B Manuale Utente
Storage Tower Preparation
Sample Installation on the tower using IDE hard drives
•
Remove the side panel screws.
•
Slide the side panel towards the backside then pull or lift to open.
•
To remove the front face panels, unscrew 2 screws on opposite sides
of the 5 ¼” drive bay on the tower
of the 5 ¼” drive bay on the tower
•
This picture shows the storage tower without both the side panels and front
faceplate.
faceplate.
Side panel
screw
locations
screw
locations
•
Make sure that screws are placed for both sides of the mounting bracket
to secure the drives.
to secure the drives.
IDE Drives
Front Face Plates
IDE drives Mounting
Brackets
Brackets
Screw Holes
•
After installing the hard drive, attach the side panels back to the storage
tower.
tower.
Side
panel
panel